Environmental Engineering - Restricted Electives - 2019/2020
1. Technical Electives
The combination of elective credits required to graduate is noted in the Course Calendar for your specific Cohort. All elective course offerings are subject to a minimum enrollment of 10 students. Courses may be cancelled by the university at any time if enrollment is less than 10. Semester offerings for courses may change without notice. Students should refer to the current Undergraduate Calendar to confirm that the course will be offered in the semester indicated in this program guide. Concerned that the elective prerequisites have changed mid-program? See the Engineering Elective Prerequisite - History of Changes table.
A maximum of 1.5 credits at the 1000 course level is allowed for elective requirements (this limit applies to all electives, including technical electives, complementary studies electives and free electives, where applicable). (Rule no longer applies as of November 2022)
NOTE: Each elective course can only be used to satisfy a requirement on ONE list (i.e. no double counting between the ENVE-1, ENVE-2 and Complimentary Studies Lists)
Environmental Engineering Electives (3.0 Credits Required Total - 1.00 credits from ENVE-1 and 2.00 credits from ENVE-2)
ENVE-1: Environmental Engineering Electives (1.00 Credits from ENVE-1)
FALL SEMESTER
ENGG*2160 [0.50] Engineering Mechanics II, F
ENGG*3080 [0.50] Energy Resources and Technologies, F
ENGG*3340 [0.50] Geographic Information Systems in Environmental Engineering, F
ENGG*4240 [0.50] Site Remediation, F (Note 2)
ENGG*4770 [0.50] Physical & Chemical W/WastewaterTreatment Design, F (Note 2)
ENGG*4810 [0.50] Control of Atmospheric Particulates, F (Note 2)
ACCT*1220 [0.50] Introductory Financial Accounting, F/W
ACCT*2230 [0.50] Management Accounting, F/W
BIOC*2580 [0.50] Introduction to Biochemistry, S/F/W
BIOL*1070 [0.50] Discovering Biodiversity, F/W
BIOL*1080 [0.50] Biological Concepts of Health, F/W
BIOL*1090 [0.50] Intro to Molecular and Cellular Biology, F/W
BIOL*2060 [0.50] Ecology, S/F/W
BIOL*3450 [0.50] Introduction to Aquatic Environments, F
BIOM*2000 [0.50] Concepts in Human Physiology, S/F/W
CHEM*2480 [0.50] Analytical Chemistry I, S/F/W
ECON*2650 [0.50] Introductory Development Economics, F
ENVS*1060 [0.50] Principles of Geology, S/F/W
ENVS*2030 [0.50] Meteorology and Climatology, F
GEOG*1300 [0.50] Intro to the Biophysical Environment, F/W (Note 1)
GEOG*1350 [0.50] Earth: Hazards and Global Change F/W (Note 1)
GEOG*2030 [0.50] Environment and Development, F
GEOG*2420 [0.50] The Earth From Space, F
GEOG*2480 [0.50] Mapping and GIS, F/W
MCS*1000 [0.50] Introductory Marketing, S/F/W
MCS*3000 [0.50] Advanced Marketing, F
POPM*3240 [0.50] Epidemiology, F/W
SOAN*3680 [0.50] Perspectives on Development, F
TOX*2000 [0.50] Principles of Toxicology, F
WINTER SEMESTER
ENGG*4070 [0.50] Life Cycle Assessment for Sustainable Design, W (Note 2)
ENGG*4250 [0.75] Watershed Systems Design, W
ENGG*4510 [0.50] Assessment & Management of Risk, W (Note 2)
ENGG*4760 [0.50] Biological Wastewater Treatment Design, W (Note 2)
ENGG*4820 [0.50] Atmospheric Emission Control: Combustion Systems, W (Note 2)
ACCT*1220 [0.50] Introductory Financial Accounting, F/W
ACCT*2230 [0.50] Management Accounting, F/W
BIOC*2580 [0.50] Introduction to Biochemistry, S/F/W
BIOL*1070 [0.50] Discovering Biodiversity, F/W
BIOL*1080 [0.50] Biological Concepts of Health, F/W
BIOL*1090 [0.50] Intro to Molecular and Cellular Biology, F/W
BIOL*2060 [0.50] Ecology, S/F/W
BIOM*2000 [0.50] Concepts in Human Physiology, S/F/W
CHEM*2480 [0.50] Analytical Chemistry I, S/F/W
CHEM*2700 [0.50] Organic Chemistry I, S/W
CIS*2500 [0.50] Intermediate Programming, W
ECON*3730 [0.50] The Origins of International Inequality, W
ENVS*1060 [0.50] Principles of Geology, S/F/W
FOOD*2010 [0.50] Principles of Food Science, S/W
GEOG*1300 [0.50] Intro to the Biophysical Environment, F/W (Note 1)
GEOG*1350 [0.50] Earth: Hazards and Global Change F/W (Note 1)
GEOG*2110 [0.50] Climate and the Biophysical Environment, W
GEOG*2210 [0.50] Environment & Resources, W
GEOG*2480 [0.50] Mapping and GIS, F/W
GEOG*3420 [0.50] Remote Sensing of the Environment, W
MCS*1000 [0.50] Introductory Marketing, S/F/W
POLS*3670 [0.50] Comparative Public Policy and Administration, W
POLS*3790 [0.50] The Political Economy of International Relations, W
POPM*3240 [0.50] Epidemiology, F/W
BIOC*2580 [0.50] Introduction to Biochemistry, S/F/W
BIOL*2060 [0.50] Ecology, S/F/W
BIOM*2000 [0.50] Concepts in Human Physiology, S/F/W
CHEM*2480 [0.50] Analytical Chemistry I, S/F/W
CHEM*2700 [0.50] Organic Chemistry I, S/W
ENVS*1060 [0.50] Principles of Geology, S/F/W
FOOD*2010 [0.50] Principles of Food Science, S/W
MCS*1000 [0.50] Introductory Marketing, S/F/W
Notes:
1 - Only one of GEOG*1300 or GEOG*1350 may be taken for credit of ENVE-1.
2 - Course also offered on ENVE-2 list. The course can only satisfy the requirement from one list.
ENVE-2 List: Environmental Engineering Electives (2.00 credits from ENVE-2)
Must Take At Least One Of:
ENGG*4810 [0.50] Control of Atmospheric Particulates, F
ENGG*4820 [0.50] Atmospheric Emission Control: Combustion Systems, W
Must Take At Least One Of:
ENGG*4760 [0.50] Biological Wastewater Treatment Design, W
ENGG*4770 [0.50] Physical & Chemical W/Wastewater Treatment Design, F
Remaining 1.0 credits from remaining ENVE-2 courses including options below:
ENGG*4070 [0.50] Life Cycle Assessment for Sustainable Design, W
ENGG*4240 [0.50] Site Remediation, F
ENGG*4510 [0.50] Assessment & Management of Risk, W
2. Complementary Studies Electives
Environmental Engineering students must select [1.50] credits (three courses) from the Complementary Studies electives. You must select courses from the following:
- 0.5 credits (1 course) from list CSE-1 Complementary Studies Electives: Humanities and Social Sciences
- 1.0 credits (2 courses) from any of the lists:
- CSE-1 Complementary Studies Electives: Humanities and Social Sciences,
- CSE-3 Complementary Studies Electives: Economics and Project Mangement, or
- CSE-4 Complementary Studies Electives: Languages (max 0.5 credit).
3. Conditions for Graduation
To qualify for the degree, the student must complete the courses required for the Bachelor of Engineering Program in Environmental Engineering, obtaining a minimum of 23.50 credits (Regular Program) or 25.50 credits (CO-OP Program), and must achieve an overall minimum cumulative average of at least 60% and a minimum cumulative average of at least 60% in all ENGG courses.