Biomedical Engineering - Restricted Electives - 2022/2023

1. Technical Electives

The combination of elective credits required to graduate is noted in the Course Calendar for your specific Cohort. All elective course offerings are subject to a minimum enrollment of 10 students. Courses may be cancelled by the university at any time if enrollment is less than 10. Semester offerings for courses may change without notice. Students should refer to the current Undergraduate Calendar to confirm that the course will be offered in the semester indicated in this program guide.  

A maximum of 1.5 credits at the 1000 course level is allowed for elective requirements (this limit applies to all electives, including technical electives, complementary studies electives and free electives, where applicable).(No longer applies as of November 2022)

BME-1 Elective List : Biomedical Engineering Electives (2.5 Credits Required)

PART A (1.5 Credits Required)
Fall Offerings (semester offering subject to change; confirm in current Calendar)
ENGG*3150  [0.50] Engineering Biomechanics, F
ENGG*3160  [0.50] Biological Engineering Systems II, F
ENGG*3270 [0.50] Electromagnetics in Biomedical Engineering, F
ENGG*3700  [0.50] Optimization for Engineers, F
ENGG*4040  [0.50] Medical Imaging Modalities, F
ENGG*4080 [0.50] Micro and Nano-Scale Electronics, F
ENGG*4460  [0.50] Robotic Systems, F
ENGG*4470  [0.50] Finite Element Analysis, F

Winter Offerings (semester offering subject to change; confirm in current Calendar)
ENGG*2340  [0.50] Kinematics and Dynamics, W (Semester 4 recommended)
ENGG*2660  [0.50] Biological Engineering Systems I, W (Semester 4 recommended)
ENGG*4050  [0.50] Quality Control, W
ENGG*4060  [0.50] Biomedical Signals Processing, W
ENGG*4510  [0.50] Assessment and Management of Risk, W
ENGG*4660  [0.50] Medical Imaging Processing, W

PART B (1.0 Credits Required)
Fall Offerings (semester offering subject to change; confirm in current Calendar)

ENGG*3150  [0.50] Engineering Biomechanics, F
ENGG*3160  [0.50] Biological Engineering Systems II, F
ENGG*3270 [0.50] Electromagnetics in Biomedical Engineering, F
ENGG*3700  [0.50] Optimization for Engineers, F
ENGG*4040  [0.50] Medical Imaging Modalities, F
ENGG*4080 [0.50] Micro and Nano-Scale Electronics, F
ENGG*4460  [0.50] Robotic Systems, F
ENGG*4470  [0.50] Finite Element Analysis, F

Winter Offerings (semester offering subject to change; confirm in current Calendar)
ENGG*2340  [0.50] Kinematics and Dynamics, W (Semester 4 recommended)
ENGG*2660  [0.50] Biological Engineering Systems I, W (Semester 4 recommended)
ENGG*4050  [0.50] Quality Control, W
ENGG*4060  [0.50] Biomedical Signals Processing, W
ENGG*4510  [0.50] Assessment and Management of Risk, W
ENGG*4660  [0.50] Medical Imaging Processing, W

Science Offerings

BIOC*2580  [0.50] Introductory Biochemistry, S/F/W
BIOM*3090  [0.50] Principles of Pharmacology, S/F/W
CHEM*2700 [0.50] Organic Chemistry I, S/W  (see Program Counsellor for prerequsite information)
CHEM*2720 [0.50] Fundamental Organic Chemistry, S/W (same course as CHEM*2700 without the lab component) [NEW COURSE S21]
HK*4070 [0.50] Clinical Biomechanics, W  (see Program Counsellor for prerequsite information)
HK*4240 [0.75] Occupational Biomechanics and Ergonomics, W
HK*4610 [0.50] Health and Injury Biomechanics, F
TOX*2000 [0.50] Principles of Toxicology, F

BME-2 Elective List: Biomedical Engineering Design Electives (0.75 Credits Required)

ENGG*4490  [0.75] Sampled Data Control Design, W
ENGG*4380  [0.75] Bioreactor Design, F
ENGG*4400  [0.75] Biomechanical Engineering Design, W

2. Complementary Studies Electives

Biomedical Engineering students must select [2.00] credits (four courses) from the Complementary Studies electives. You must select courses from the following:

• 0.5 credits (1 course) from list CSE-1 Complementary Studies Electives: Humanities and Social Sciences
• 0.5 credits (1 course) from list CSE-2 Complementary Studies Electives: Sustainable Development and Environmental Stewardship
• 1.0 credits (2 courses) from any of the lists:
  • CSE-1 Complementary Studies Electives: Humanities and Social Sciences,
  • CSE-2 Complementary Studies Electives: Sustainable Development and Environmental Stewardship,
  • CSE-3 Complementary Studies Electives: Economics and Project Management, or
  • CSE-4 Complementary Studies Electives: Languages (max. 0.5 credit).

3. Biomedical Engineering Elective Areas of Interest

Areas of Interest are optional.  Selection of the restricted elective courses available in the BME-1 and BME-2 lists should be based on each student's personal and professional interests.  Students who wish to strengthen their knowledge in a particular area of interest can use the chart below for reference. 

Note:  Not an inclusive list of all options.  See BME-1 List for all electives.

[Return to Biomedical Engineering Program Guide]