Students in this program obtain a liberal engineering education, which includes a comprehensive core of science, mathematics and engineering science that provides a strong foundation for engineering design and analysis. This enables students to undertake the solution of engineering problems in the areas of systems and computing, biological, environmental and water resources. Core subjects, combined with elective opportunities, provide an understanding of the connection between engineering and science, coupled with the interdisciplinary skills needed to address the problems and challenges faced by engineers in society today.

The curriculum includes a strong emphasis on engineering design. Students engage in engineering design throughout the program, and gain experience in computer aided design and modeling, conceptual design and physical construction. Emphasis is on teamwork and communications skills, as well as working on interdisciplinary projects.

Career opportunities are open in many segments of the economy. Examples are: consulting services to municipalities, utilities and industry; resource agencies in advisory, regulatory, planning and utilization; service industries of construction, power and water supply and public health; manufacturing, design of computer and control systems, hardware and software development; medical devices, pharmaceutical and food industries and industrial ergonomics; academic research and graduate studies within and without the field of engineering.

Many engineers assume management responsibilities after gaining experience in design, development and operations. The balance provided by liberal arts and engineering education allows graduates to enjoy a great deal of career mobility.

The baccalaureate degree programs in all engineering programs are accredited by the Canadian Engineering Accreditation Board of the Canadian Council of Professional Engineers. Graduates from accredited engineering programs have the educational requirements to apply for membership in the Professional Engineers, Ontario (PEO) and other provinces after a number of years of acceptable engineering experience and successful completion of a PEO examination in engineering law and ethics.

Students combine their required courses in mathematics, physical sciences and engineering with additional credits providing the opportunity for specialization in: one of the programs; complementary studies courses; and elective subjects. A minimum of 23.50 credits must be obtained. At least 3.00 credits must be complementary studies, which consist of courses in the social sciences, arts, management, engineering economics and communication. They complement the technical content of the curriculum.

All credits are selected according to the schedule of studies for the program. Restrictions apply to the number of non-core credits which may be at the 1000 level. Further information on approved courses may be obtained from the B.Sc.(Eng.) Program Guide available from the director or program counsellor of the School of Engineering.

The choice of program is made at the time of application. Change of program requires the approval of the director.

The available programs are:

Biological Engineering - the application of engineering to the control and management of biological processes, environments, and human factors in engineering design.

Engineering Systems and Computing - the application of engineering to the design, operation and management of data sensing, transmission and, processing systems, and of control systems.

Environmental Engineering - the application of engineering to protect and restore the environment, through the prevention and treatment of gaseous, liquid and solid wastes.

Water Resources Engineering - the application of engineering to the control and management of water and soil resources to meet human needs while sustaining the natural environment.

The schedule of studies for each program is provided below but guidance in the selection of appropriate courses is available from the program counsellor of the School of Engineering.

Students lacking OAC courses are advised to consult the Recommendations and Notes in Section IV--Admission Information-B.Sc.(Eng.).

Students are advised to consult the regulations for continuation of study within the program which are outlined in detail in Section VIII, Undergraduate Degree Regulation & Procedures. Students will be ineligible to continue in the B.Sc. (Eng.) program and will not be readmitted to the degree program if the same course is failed three times.

Normally, students in the B.Sc. (Eng.) program will be permitted only one supplemental privilege during their studies. It will usually be granted for 3000 or 4000 level courses only.

To qualify for the degree the student must complete the courses required for a B.Sc. (Eng.) program, obtaining a minimum of 23.50 credits and must achieve an overall minimum cumulative average of at least 60% and a minimum cumulative average of at least 60% in all ENGG courses.

Students studying for the B.SC. (ENG.) degree may participate in a Co-operative Education program following the completion of the first 4 semesters of study. The Co-operative Education program consists of a minimum of 4 semesters of experience in industry with employers who participate in the program. Reports and assignments are graded by a faculty supervisor with assistance from the employer. Evaluations of Co-op semesters are recorded on the student's academic record. The Co-operative Education program provides an excellent opportunity for students to obtain work experience in industry directly related to their field of study. Interested students should consult their program counsellor.

Students wishing to participate in the Co-operative Education program should indicate their intention to do so by applying for admission to the Co-op program on entrance. Following the completion of semester 2, in-course applicants will be considered for admission to the Co-op program.

Successful applicants will:

1. have a minimum cumulative average of 70% in semesters 1 and 2

2. have successfully completed all of the credits required in the schedule of studies for semesters 1 and 2

3. be employable in Canada (i.e. be a Canadian citizen or a permanent resident in Canada)

4. have obtained the approval of their Co-op advisor in the school to participate in the program. The Co-op advisor's approval will signify that the schedule of work semesters in the Co-op program as planned by the student is compatible with the schedule of studies in the program in which the student is enrolled.

5. completion of COOP*1100 is a requirement for entry into the first work term.

Please refer to Co-operative Education Program for Admission requirements into the Co-op Program.

Co-op Work Schedule
	Yr. 1	Yr. 2	Yr. 3	Yr. 4	Yr. 5
Fall	1	3	5	6	work
Winter	2	4	work	7	8
Spring		work	work	work

All candidates must complete a minimum of 4 of the preceding 5 work terms.