X. Degree Programs

Bachelor of Engineering [B.Eng.]

Engineering Systems and Computing Program Regular and Co-op (ESC/ESC:C)

School of Engineering, College of Physical and Engineering Science

In the last quarter century, the computer has grown so rapidly in importance that engineering, science, business and industry could not function without it. With this growth, a need has evolved for specialists who can incorporate computers and information into complex industrial processes. The Engineering Systems and Computing program has been conceived to satisfy this need. Graduates from this program will have, in addition to the basic engineering skills, the ability to identify application areas where computer technology represents the optimum solution, specify appropriate software for process control, data reduction and/or expert system implementation and integrate the computer into the overall system application.

Major (Honours Program)

Semester 1 - Regular or Co-op
CHEM*1040 [0.50] General Chemistry I
CIS*1500 [0.50] Introduction to Programming
ENGG*1100 [0.75] Engineering and Design I
MATH*1200 [0.50] Calculus I
One of:
ENGG*1210 [0.50] Engineering Mechanics I
HIST*1250 [0.50] Science and Society Since 1500
Note: ENGG*1210 or HIST*1250 must be taken in semester 1; the remaining course must be taken in semester 2.
Semester 2 - Regular or Co-op
CIS*2500 [0.50] Intermediate Programming
ENGG*1500 [0.50] Engineering Analysis
MATH*1210 [0.50] Calculus II
PHYS*1010 [0.50] Introductory Electricity and Magnetism
PHYS*1130 [0.50] Physics with Applications
One of:
ENGG*1210 [0.50] Engineering Mechanics I
HIST*1250 [0.50] Science and Society Since 1500
Semester 3 - Regular or Co-op
CIS*2430 [0.50] Object Oriented Programming
COOP*1100 [0.00] Introduction to Co-operative Education
ENGG*2120 [0.50] Material Science
ENGG*2400 [0.50] Engineering Systems Analysis
ENGG*2410 [0.50] Digital Systems Design Using Descriptive Languages
MATH*2270 [0.50] Applied Differential Equations
One of:
ENGG*2100 [0.75] Engineering and Design II
STAT*2120 [0.50] Probability and Statistics for Engineers
Note: ENGG*2100 or STAT*2120 must be taken in semester 3; the remaining course must be taken in semester 4.
Semester 4 - Regular or Co-op
CIS*3110 [0.50] Operating Systems
ENGG*2230 [0.50] Fluid Mechanics
ENGG*2450 [0.50] Electric Circuits
MATH*2130 [0.50] Numerical Methods
0.50 restricted electives
One of:
ENGG*2100 [0.75] Engineering and Design II
STAT*2120 [0.50] Probability and Statistics for Engineers
Semester 5 - Regular or Co-op
CIS*2520 [0.50] Data Structures
ENGG*3260 [0.50] Thermodynamics
ENGG*3390 [0.50] Signal Processing
ENGG*3450 [0.50] Electrical Devices
ENGG*3640 [0.50] Microcomputer Interfacing
0.50 restricted electives
Semester 6 - Regular / Semester 7 - Co-op
ENGG*3100 [0.75] Engineering and Design III
ENGG*3410 [0.50] Systems and Control Theory
ENGG*3430 [0.50] Heat and Mass Transfer
1.00 or 1.25 restricted electives
Semester 7 - Regular / Semester 6 - Co-op
ENGG*3240 [0.50] Engineering Economics
ENGG*4420 [0.75] Real-time Systems Design
ENGG*4450 [0.50] Large-Scale Software Architecture Engineering
1.00 or 1.25 restricted electives
Semester 8 - Regular or Co-op
ENGG*4120 [1.00] Engineering Systems and Computing Design IV
ENGG*4280 [0.75] Digital Process Control Design
1.00 electives
Restricted Electives (see Program Guide for more information)

A maximum of 1.50 credits at the 1000 level is allowed for elective requirements.

  • 2.00 credits in Complementary Studies (Students need to take 0.50 credits from each of the three sub-lists noted in the Program Guide. The remaining 0.50 credits can be taken from any Complementary Studies sub-list.)

  • 1.50 credits in ES&C Engineering electives

  • 0.75 credits in ES&C Engineering Design electives

University of Guelph
50 Stone Road East
Guelph, Ontario, N1G 2W1
Canada
519-824-4120