X. Degree Programs
Bachelor of Engineering [B.Eng.]
Mechanical Engineering Program Regular and Co-op (MECH/MECH:C)
School of Engineering, College of Physical and Engineering Science
Mechanical Engineering at Guelph is built around concepts of sustainability and sustainable design to equip graduates to tackle
issues associated with emerging technologies. Graduates in mechanical engineering are able to apply mathematical, scientific
and engineering principles to a wide variety of fields and find employment across the private and public sectors. The program
provides students with a common base of knowledge essential to mechanical engineering, and then allows them to select from
a menu of electives to attain a degree of specialization in one of five areas, or to choose electives which broaden their
general knowledge base. Elective concentrations are available in the areas of wind and solar energy, food and beverage engineering,
mechatronics, manufacturing system design and biomechanics.
Major (Honours Program)
Semester 1 - Regular or Co-op
| CHEM*1040 |
[0.50] |
General Chemistry I |
| CIS*1500 |
[0.50] |
Introduction to Programming |
| ENGG*1100 |
[0.75] |
Engineering and Design I |
| MATH*1200 |
[0.50] |
Calculus I |
| One of: |
| ENGG*1210 |
[0.50] |
Engineering Mechanics I |
| HIST*1250 |
[0.50] |
Science and Technology in a Global Context |
|
| Note: One of ENGG*1210 and HIST*1250 must be taken in semester 1; the remaining course must be taken in semester 2.
|
Semester 2 - Regular or Co-op
| ENGG*1500 |
[0.50] |
Engineering Analysis |
| MATH*1210 |
[0.50] |
Calculus II |
| PHYS*1010 |
[0.50] |
Introductory Electricity and Magnetism |
| PHYS*1130 |
[0.50] |
Physics with Applications |
| One of: |
| ENGG*1210 |
[0.50] |
Engineering Mechanics I |
| HIST*1250 |
[0.50] |
Science and Technology in a Global Context |
|
Semester 3 - Regular or Co-op
| COOP*1100 |
[0.00] |
Introduction to Co-operative Education |
| ENGG*1070 |
[0.25] |
Occupational Health and Safety |
| ENGG*2160 |
[0.50] |
Engineering Mechanics II |
| ENGG*2400 |
[0.50] |
Engineering Systems Analysis |
| MATH*2270 |
[0.50] |
Applied Differential Equations |
| One of: |
| ENGG*2100 |
[0.75] |
Engineering and Design II |
| STAT*2120 |
[0.50] |
Probability and Statistics for Engineers |
|
| One of: |
|
|
| Note: ENGG*2100 or STAT*2120 must be taken in semester 3; the remaining course must be taken in semester 4.
|
| Note:ENGG*2120 or ENGG*2230 must be taken in semester 3; the remaining course must be taken in semester 4.
|
Semester 4 - Regular or Co-op
| ENGG*2180 |
[0.50] |
Introduction to Manufacturing Processes |
| ENGG*2340 |
[0.50] |
Kinematics and Dynamics |
| ENGG*2450 |
[0.50] |
Electric Circuits |
| MATH*2130 |
[0.50] |
Numerical Methods |
| One of: |
| ENGG*2100 |
[0.75] |
Engineering and Design II |
| STAT*2120 |
[0.50] |
Probability and Statistics for Engineers |
|
| One of: |
|
|
Semester 5 - Regular or Co-op
Semester 6 - Regular / Semester 7 - Co-op
| ENGG*3100 |
[0.75] |
Engineering and Design III |
| ENGG*3370 |
[0.50] |
Applied Fluids and Thermodynamics |
| ENGG*3410 |
[0.50] |
Systems and Control Theory |
| ENGG*3430 |
[0.50] |
Heat and Mass Transfer |
| 1.00 restricted electives |
Semester 7 - Regular / Semester 6 - Co-op
| ENGG*4000 |
[0.00] |
Proposal for Engineering Design IV |
| 2.50 restricted electives |
| Note: MECH:C students must register for ENGG*4000 in the final co-op work term semester immediately preceding registration in ENGG*4160.
|
Semester 8 - Regular or Co-op
| ENGG*4160 |
[1.00] |
Mechanical Engineering Design IV |
| 2.25 restricted electives |
Restricted Electives (see Program Guide for more information)
A maximum of 1.50 credits at the 1000 level is allowed for elective requirements.
-
2.00 credits in Complementary Studies (Students need to take 0.50 credits from each of the three sub-lists noted in the Program
Guide. The remaining 0.50 credits can be taken from any Complementary Studies sub-list.)
-
0.75 credits in Mechanical Engineering Design electives.
-
A minimum of 3.50 credits in Mechanical Engineering electives. Specific credit requirements vary by the mechanical engineering
design elective chosen. Please consult the Program Guide for further information on the prerequisite requirements specific
to each mechanical engineering design elective.
